SCHNEIDER - ATS48 30 KW 62A ALTI START TEGANGAN 230-415 VAC, STD

Category: SOFT STARTER
No Referensi: ATS48D62Q
HUBUNGI KAMI

Call / Whatsapp:


Whatsapp Only:


Tokopedia:

Main
range of product
Altistart 48
product or component type
Soft starter
product destination
Asynchronous motors
product specific application
Heavy duty industry and pumps
device short name
ATS48
power supply voltage
230...415 V (- 15...10 %)
motor power kW
55 kW at 400 V (connection to the motor delta terminals) for standard applications
11 kW at 230 V (connection in the motor supply line) for severe applications
15 kW at 230 V (connection in the motor supply line) for standard applications
22 kW at 230 V (connection to the motor delta terminals) for severe applications
22 kW at 400 V (connection in the motor supply line) for severe applications
30 kW at 230 V (connection to the motor delta terminals) for standard applications
30 kW at 400 V (connection in the motor supply line) for standard applications
45 kW at 400 V (connection to the motor delta terminals) for severe applications
power dissipation in W
For severe applications 153 W
For standard applications 201 W
utilisation category
AC-53A
type of start
Start with torque control (current limited to 5 In)
Icl nominal current
107 A (connection to the motor delta terminals) for severe applications
107 A (connection to the motor delta terminals) for standard applications
62 A (connection in the motor supply line) for severe applications
62 A (connection in the motor supply line) for standard applications
IP degree of protection
IP20
Complementary
assembly style
With heat sink
function available
External bypass (optional)
power supply voltage limits
195...456 V
power supply frequency
50...60 Hz (- 5...5 %)
power supply frequency limits
47.5...63 Hz
device connection
In the motor supply line
To the motor delta terminals
factory setting current
57 A
[Uc] control circuit voltage
220 - 15 % to 415 + 10 %, 50/60 Hz
control circuit consumption
30 W
discrete output number
2
discrete output type
(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
output absolute accuracy precision
+/- 5 %
minimum switching current
Relay outputs 10 mA at 6 V DC
maximum switching current
Logic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 ms
Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 ms
discrete input number
5
discrete input type
PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
discrete input voltage
24 V (<= 30 V)
discrete input logic
Positive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mA
starting current
Adjustable 0.4...1.3 Icl
analogue output type
(AO) current output 0-20 mA or 4-20 mA <= 500 Ohm
communication port protocol
Modbus
connector type
1 RJ45
communication data link
Serial
physical interface
RS485 multidrop
transmission rate
4800, 9600 or 19200 bps
max nodes number
31
protection type
Phase failure (line)
Thermal protection (motor)
Thermal protection (starter)
marking
CE
type of cooling
Forced convection
operating position
Vertical +/- 10 degree
height
290 mm
width
190 mm
depth
235 mm
product weight
8.3 kg
Motor power range AC-3
7...11 kW at 200...240 V 3 phases
15...25 kW at 380...440 V 3 phases
15...25 kW at 200...240 V 3 phases
30...50 kW at 200...240 V 3 phases
30...50 kW at 380...440 V 3 phases
55...100 kW at 380...440 V 3 phases
motor starter type
Soft starter
Environment
electromagnetic compatibility
Conducted and radiated emissions conforming to IEC 60947-4-2 level A
Conducted and radiated emissions conforming to IEC 60947-4-2 level B
Damped oscillating waves conforming to IEC 61000-4-12 level 3
Electrostatic discharge conforming to IEC 61000-4-2 level 3
Immunity to electrical transients conforming to IEC 61000-4-4 level 4
Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3
Voltage/current impulse conforming to IEC 61000-4-5 level 3
standards
EN/IEC 60947-4-2
product certifications
CCC
CSA
C-Tick
DNV
GOST
NOM 117
SEPRO
TCF
UL
vibration resistance
1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level
58 dB
pollution degree
Level 3 conforming to IEC 60664-1
relative humidity
0...95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation
40...60 °C with current derating of 2 % per °C
-10...40 °C without derating
ambient air temperature for storage
-25...70 °C
operating altitude
<= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m