SCHNEIDER - SMART RELAY ZELIO 20 I/O. 24VDC. CLK

Zelio Logic

Compact smart relay

With

0...500 with FBD programming
0...240 with ladder programming

6...90 ms

10 years at 25 °C

6 s/month at 25 °C
12 min/year at 0...55 °C

Program memory on each power up

24 V DC

19.2...30 V

100 mA (without extension)

6 W without extension

With

12 conforming to EN/IEC 61131-2 type 1

Resistive

24 V DC

4 mA

1 kHz for discrete input

>= 15 V for I1...IA and IH...IR discrete input circuit
>= 15 V for IB...IG used as discrete input circuit

<= 5 V for I1...IA and IH...IR discrete input circuit
<= 5 V for IB...IG used as discrete input circuit

>= 1.2 mA for IB...IG used as discrete input circuit
>= 2.2 mA for I1...IA and IH...IR discrete input circuit

<= 0.75 mA for I1...IA and IH...IR discrete input circuit
<= 0.75 mA for IB...IG used as discrete input circuit

3-wire proximity sensors PNP (discrete input)

6

Common mode

0...10 V
0...24 V

30 V (analogue input circuit)

8 bits

39 mV (analogue input circuit)

Smart relay cycle time for analogue input circuit

+/- 5 % at 25 °C for analogue input circuit
+/- 6.2 % at 55 °C for analogue input circuit

+/- 2 % at 55 °C for analogue input circuit

10 m between stations, with screened cable (sensor not isolated) for analogue input circuit

12 kOhm (IB...IG used as analogue input circuit)
12 kOhm (IB...IG used as discrete input circuit)
7.4 kOhm (I1...IA and IH...IR discrete input circuit)

8 relay output(s)

24...250 V AC (relay output)
5...30 V DC (relay output)

NO for relay output

8 A for all 8 outputs (relay output)

500000 cycles AC-12 at 230 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
500000 cycles AC-15 at 230 V, 0.9 A for relay output conforming to EN/IEC 60947-5-1
500000 cycles DC-12 at 24 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
500000 cycles DC-13 at 24 V, 0.6 A for relay output conforming to EN/IEC 60947-5-1

>= 10 mA at 12 V (relay output)

0.1 Hz (at Ie) for relay output
10 Hz (no load) for relay output

10000000 cycles (relay output)

4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1

With

10 ms (from state 0 to state 1) for relay output
5 ms (from state 1 to state 0) for relay output

Screw terminals, clamping capacity: 1 x 0.2...1 x 2.5 mm² AWG 25...AWG 14 semi-solid
Screw terminals, clamping capacity: 1 x 0.2...1 x 2.5 mm² AWG 25...AWG 14 solid
Screw terminals, clamping capacity: 1 x 0.25...1 x 2.5 mm² AWG 24...AWG 14 flexible with cable end
Screw terminals, clamping capacity: 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16 solid
Screw terminals, clamping capacity: 2 x 0.25...2 x 0.75 mm² AWG 24...AWG 18 flexible with cable end

0.5 N.m

III conforming to EN/IEC 60664-1

0.38 kg

<= 10 ms

CSA
C-Tick
GL
GOST
UL

EN/IEC 60068-2-27 Ea
EN/IEC 60068-2-6 Fc
EN/IEC 61000-4-11
EN/IEC 61000-4-12
EN/IEC 61000-4-2 level 3
EN/IEC 61000-4-3
EN/IEC 61000-4-4 level 3
EN/IEC 61000-4-5
EN/IEC 61000-4-6 level 3

IP20 (terminal block) conforming to IEC 60529
IP40 (front panel) conforming to IEC 60529

EMC directive conforming to EN/IEC 61000-6-2
EMC directive conforming to EN/IEC 61000-6-3
EMC directive conforming to EN/IEC 61000-6-4
EMC directive conforming to EN/IEC 61131-2 zone B
Low voltage directive conforming to EN/IEC 61131-2

Class B conforming to EN 55022-11 group 1

2 conforming to EN/IEC 61131-2

-20...40 °C in non-ventilated enclosure conforming to IEC 60068-2-1 and IEC 60068-2-2
-20...55 °C conforming to IEC 60068-2-1 and IEC 60068-2-2

-40...70 °C

2000 m

<= 3048 m

95 % without condensation or dripping water